A few people report issues with crashing. Here I will try and list the main reasons and things to try. You can also visit the Wiki FAQ page which gives a few more things to try.
https://aworldoficeandfire.co.uk/wiki/index.php/FAQ
Make sure you are running the latest version of warband. This mod will only run correctly with version 1.172+.
An obvious one but make sure you are running the latest version of the mod. The latest version will always be linked at the very top of the boards.
Turn on 'Load textures on demand'
Make sure you are not running the game in edit mode.
If you experience stuttering but high fps then your cpu is probably not good enough to handle the formations ai. Try turning this off in the mod options.
If you have low fps then try turning your settings down in the game options.
HELP! The battles on my game gets just laggy af, but only those with war parties involved, even if they are little ones.
I've read the reasons avobe and it's not my case since I could play the mod without problems before the patch 9.0 and 9.5.
Another detail I've noticed is that the reports shown on the bottom left part of the screen while in battle doesn't shows anymore
and I can't use backspace to see the map and I will say it again, it is not a problem with mi cpu, pc or wathever.
I hope you can help me because I liked a lot this mod and I just want to play it like I did on 8.5...
You need to have Warband v.1.168+. This is since Beta 9.0.
I have the 1.168 version...
Quote from: NordicWoosh on June 10, 2016, 08:10:04 PM
I have the 1.168 version...
If you are using steam please make sure you 'verify integrity of game cache'
Quote from: NordicWoosh on June 08, 2016, 07:53:17 PM
HELP! The battles on my game gets just laggy af, but only those with war parties involved, even if they are little ones.
I've read the reasons avobe and it's not my case since I could play the mod without problems before the patch 9.0 and 9.5.
Another detail I've noticed is that the reports shown on the bottom left part of the screen while in battle doesn't shows anymore
and I can't use backspace to see the map and I will say it again, it is not a problem with mi cpu, pc or wathever.
I hope you can help me because I liked a lot this mod and I just want to play it like I did on 8.5...
here are some tips that will double the performance of you PC. My computer is 3 years old (400 euros) but I can play all (!!!) games with high graphics and minimum to zero lag:
1: Create a new limited account/user in windows.
Restart pc and chose new account.
Play m&b;w (or desired game) with this new account. Name each account accordingly so it is easy to access. I have 20 accounts on my PC , each for a specific game.
2: Click START
My game is currently the latest version but I am still having trouble launching the mod.
I've verified the game cache multiple times but the game is still crashing upon loading the game 1/4 ~ 1/2 of the way.
The code to turn on 'Load textures on demand' is:
use_ondemand_textures = 1
use_ondemand_textures_mt = 1
correct?
Is there anything else i should try?
Where do i go to to turn on the 'load textures on demand?'
In the launcher, select Configure -> Video Options ->Load textures on demand; make sure this is ticked.
Not sure if it's the same on the mac version, but here are some screenshots anyways.
[spoiler]
(http://image.prntscr.com/image/a1403433a778468297a12a64f6d0d5ab.png)
(http://image.prntscr.com/image/65559f8854fb44b0b7457779cbf1d77d.png)
[/spoiler]
Quote from: Kokalo on July 28, 2016, 09:08:19 PM
In the launcher, select Configure -> Video Options ->Load textures on demand; make sure this is ticked.
Not sure if it's the same on the mac version, but here are some screenshots anyways.
[spoiler]
(http://image.prntscr.com/image/a1403433a778468297a12a64f6d0d5ab.png)
(http://image.prntscr.com/image/65559f8854fb44b0b7457779cbf1d77d.png)
[/spoiler]
thank you for your help, but i am on mac and there is no such option. I can only lower the texture detail, shadow quality and window resolution.
Hello
First thing first. Thank you for your devotion and hard work.
Now. My game crash always about 70th day. No matter where I am on the map.
previous version 9.9 was quite stable. So it is not a problem of my hardware or "settings". I'm waiting for 1.1.
When I go to start my game an error message comes up saying unable to load Modules/AWOIAFv1.3/Resource/textures.brf. I followed the same process in installing the mod as I have my other warband mods. Any idea why this is happening?
Probabl you're trying to load only the patch for 1.3. You need to have 1.2 on modules and then extract over that folder the patch (take in mind the patch have a folder inside, first open the folder then extract the contents over 1.2
Quote from: Riven on June 09, 2017, 07:51:35 AM
Probabl you're trying to load only the patch for 1.3. You need to have 1.2 on modules and then extract over that folder the patch (take in mind the patch have a folder inside, first open the folder then extract the contents over 1.2
That was it. Thank you!!
My game loads to about 1/4 and then crashes but I don't get an error message any suggestions on what I should do.
Hey, im having a problem where my game will load and get to the main menu screen but no matter what I press it crashed right afterwards with "Mound and Blade Warband has stopped working"
my game crashes when it starts to load. it appears an error: get_object failed for texture: manface_young
Quote from: Produno on May 02, 2016, 11:26:46 AM
A few people report issues with crashing. Here I will try and list the main reasons and things to try.
Make sure you are running the latest version of warband. This mod will only run correctly with version 1.172+.
An obvious one but make sure you are running the latest version of the mod. The latest version will always be linked at the very top of the boards.
Turn on 'Load textures on demand'
Make sure you are not running the game in edit mode.
If you experience stuttering but high fps then your cpu is probably not good enough to handle the formations ai. Try turning this off in the mod options.
If you have low fps then try turning your settings down in the game options.
Hey after your new update i am getting unbearable fps and at 1.2 i was getting really good fps did you let change the graphic engine and if so can you please have a version when the old one from 1.2 and before please or can you show use how if you dont have the time to do it over and upload it
I'm getting runtime CTDs regularly (almost always during screen transitions), and in the case of a battle to take King's Landing it CTDs every time I finish the first battle after hitting tab to proceed. Here's a link to my save from right before the battle where it's a repeatable CTD, https://drive.google.com/open?id=0B0xe8NAN1WxPZUxieFNHOU1RN1k
My game is up to date, I've verified my files with Steam.
I've only used v2.2, first the download from Steam. The in an attempt for stability after reading there was issues with the steam download, I switched to the the v2.0 and v2.2 hotfix from ModDB.
I've tried with textures on demand on, then tried with off, then tried with on again.
I've turned the cinematic view on town screen setting off.
I've lowered the battle size to 300, even though I've never had an issue running 750 with other mods.
I have an i7, 1080, and 16GB ram
Windows 10 is up to date.
Is there anything else I can try to make the game stable?
I really want to keep playing this because I love the mod, but the frustration with the crashing is unbearable.
I did use my save from starting with the Steam files when I switched to the ModDB files, could that be a problem?
Quote from: Gambit77 on October 12, 2017, 02:09:05 AM
I'm getting runtime CTDs regularly (almost always during screen transitions), and in the case of a battle to take King's Landing it CTDs every time I finish the first battle after hitting tab to proceed. Here's a link to my save from right before the battle where it's a repeatable CTD, https://drive.google.com/open?id=0B0xe8NAN1WxPZUxieFNHOU1RN1k
My game is up to date, I've verified my files with Steam.
I've only used v2.2, first the download from Steam. The in an attempt for stability after reading there was issues with the steam download, I switched to the the v2.0 and v2.2 hotfix from ModDB.
I've tried with textures on demand on, then tried with off, then tried with on again.
I've turned the cinematic view on town screen setting off.
I've lowered the battle size to 300, even though I've never had an issue running 750 with other mods.
I have an i7, 1080, and 16GB ram
Windows 10 is up to date.
Is there anything else I can try to make the game stable?
I really want to keep playing this because I love the mod, but the frustration with the crashing is unbearable.
I did use my save from starting with the Steam files when I switched to the ModDB files, could that be a problem?
It's not impossible for it to be a save issue, but it's highly unlikely, try a new save for an hour or so and see how you get on.
P.s - Export and Import Character if you don't want to lose character progress.
Been trying a new game for a couple days and have only gotten a couple runtime CTDs and neither was repeatable, so it might be worth instructing people to not migrate their saves if they switch from Steam to ModDB files.
So everytime I take over a castle, I get the 4 options.
A: Conquer and forbade plundering
B: Conquer and Plunder
C: Plunder and leave
D: Devastate
Everytime I do anything besides choice A my game will crash. Any ways to fix that?
Perhaps this could help some...
I had random crashes with M&B and especially with the AWOIAF mod.
Checked dozens of graphics and chipset drivers, reinstalled the game several times and even the whole system.
Tested different graphics cards but this error and crashes remained and appeared completely random.
When i was about to change also the PSU on my PC i noticed a broken capacitor on the mainboard.
-> new mainboard -> all issues gone ;)
This was totally weird because in all other applications even in newer games, i had no issues!
Only in AWOIAF --- as if this mod is so genius that it needed an extra capacitor on the board ;D
To be serious it seems the M&B engine is very unstable and even a small hardware issue forces the game to crash even if much newer and powerful games do not suffer from this.
So now every time I try to plunder a village it will crash. It'll say charge the peasants or leave them be. I click charge, and the game crashes. Any suggestions?
Hi. ......my game keep crashing on the loading screen
Game is 1.168 and mod is 3.0
It say runtime error ...???????
An solution or just have to update game to 1.172
(Note : have tried other trick like texture on demand ,single thread)
Quote from: SAFAL GURUNG on February 20, 2018, 04:14:59 PM
Hi. ......my game keep crashing on the loading screen
Game is 1.168 and mod is 3.0
It say runtime error ...???????
An solution or just have to update game to 1.172
(Note : have tried other trick like texture on demand ,single thread)
definitely upgrade to 1.172
AWOFAI version3.0 is for warband 1.172
Is AWOIAF version3.0 supported only to warband 1.172....???
Quote from: SAFAL GURUNG on February 21, 2018, 08:33:35 AM
Is AWOIAF version3.0 supported only to warband 1.172....???
yep, only 1.172 and up
Hey, i got an issue, I was training peasants(the bandits quest) and after i ended with the teaching we went to fight but there was like a million of peasants and the game eventually crashed, since they didn't stop coming out. Also, how does i give fiefs to non-companion lords? I have a minister and it doesn't have that option.
Quote from: Koelb on February 27, 2018, 03:20:54 AM
Hey, i got an issue, I was training peasants(the bandits quest) and after i ended with the teaching we went to fight but there was like a million of peasants and the game eventually crashed, since they didn't stop coming out. Also, how does i give fiefs to non-companion lords? I have a minister and it doesn't have that option.
I've had same problem with my minister some time ago, but I heard that it aint a problem If U choose your wife as minister(or some of your companions) but I didn't tried that yet.
I think is better to put a companion as minister. I'll try it out once i fix the crash problem, but looks like I will have to give up on that save and start again, because my current one sends me directly to the last peasant training and therefore to the fight.
Quote from: Koelb on February 27, 2018, 03:20:54 AM
Hey, i got an issue, I was training peasants(the bandits quest) and after i ended with the teaching we went to fight but there was like a million of peasants and the game eventually crashed, since they didn't stop coming out. Also, how does i give fiefs to non-companion lords? I have a minister and it doesn't have that option.
you probably levelled yourself to 63, it kinda breaks the game and scales it so that parties become huge. to give your companions fiefs, make your wife or a companion minister. it'll also open up more diplomacy options.
Quote from: Indo95 on February 28, 2018, 02:12:43 AM
Quote from: Koelb on February 27, 2018, 03:20:54 AM
Hey, i got an issue, I was training peasants(the bandits quest) and after i ended with the teaching we went to fight but there was like a million of peasants and the game eventually crashed, since they didn't stop coming out. Also, how does i give fiefs to non-companion lords? I have a minister and it doesn't have that option.
you probably levelled yourself to 63, it kinda breaks the game and scales it so that parties become huge. to give your companions fiefs, make your wife or a companion minister. it'll also open up more diplomacy options.
You were right about both, I imported a character so it went to level 2000 out of nowhere, guess I'll just give up on that save. Thank you!
Quote from: Koelb on March 04, 2018, 02:24:48 AM
Quote from: Indo95 on February 28, 2018, 02:12:43 AM
Quote from: Koelb on February 27, 2018, 03:20:54 AM
Hey, i got an issue, I was training peasants(the bandits quest) and after i ended with the teaching we went to fight but there was like a million of peasants and the game eventually crashed, since they didn't stop coming out. Also, how does i give fiefs to non-companion lords? I have a minister and it doesn't have that option.
you probably levelled yourself to 63, it kinda breaks the game and scales it so that parties become huge. to give your companions fiefs, make your wife or a companion minister. it'll also open up more diplomacy options.
You were right about both, I imported a character so it went to level 2000 out of nowhere, guess I'll just give up on that save. Thank you!
Why don't you just import a character with a lower level?
Quote from: King J on March 05, 2018, 07:34:46 PM
Quote from: Koelb on March 04, 2018, 02:24:48 AM
Quote from: Indo95 on February 28, 2018, 02:12:43 AM
Quote from: Koelb on February 27, 2018, 03:20:54 AM
Hey, i got an issue, I was training peasants(the bandits quest) and after i ended with the teaching we went to fight but there was like a million of peasants and the game eventually crashed, since they didn't stop coming out. Also, how does i give fiefs to non-companion lords? I have a minister and it doesn't have that option.
you probably levelled yourself to 63, it kinda breaks the game and scales it so that parties become huge. to give your companions fiefs, make your wife or a companion minister. it'll also open up more diplomacy options.
You were right about both, I imported a character so it went to level 2000 out of nowhere, guess I'll just give up on that save. Thank you!
Why don't you just import a character with a lower level?
or simply edit the character's level before importing
Hi i installed this mod only very recently it was running relatively fine with time to time runtime c++ errors but as i got to lieke day 111 it crashes after every battle exiting town or coquering castle i allways get that microsoft runtime library c++ error i have mod version 3.6 lates verion of warband 16gbs of ram gtx 1070 i5 cpu any help ?
i receive run time error in loading screen or after character creation
Fix Runtime Error C++
>> Turn Windows features on or off
>> Open/Expand: .NET Framework 3.5
>> Mark both Windows Communication Foundation....
>> OK
What do you mean? Can you please explain? These errors are annoying me in 4.1
Quote from: Henry Kane on January 06, 2019, 01:54:58 PM
Fix Runtime Error C++
>> Turn Windows features on or off
>> Open/Expand: .NET Framework 3.5
>> Mark both Windows Communication Foundation....
>> OK
I followed these instructions however the problem persists. I never had this issue before but I am using a new (and better) computer. I'm racking my brain as to how to overcome this.
Hello i recently downloaded this mod again on a new computer and it seems i cant get through more than 10 minutes before the mod crashes with Microsoft Visual C++ Runtime Library error, it mostly happens when i got into or out of towns but it has also happened during battles, i already tried checking the Load Textures on Demand option and also i tried the .NET Framework 3.5 option listed here, none of them seem to work, it only happens with this Mod of Warband, both the mod and the game are updated and i used to have this mod on another much older computer and it didnt happen
Quote from: Thrasher95 on March 02, 2019, 01:24:45 AM
Hello i recently downloaded this mod again on a new computer and it seems i cant get through more than 10 minutes before the mod crashes with Microsoft Visual C++ Runtime Library error, it mostly happens when i got into or out of towns but it has also happened during battles, i already tried checking the Load Textures on Demand option and also i tried the .NET Framework 3.5 option listed here, none of them seem to work, it only happens with this Mod of Warband, both the mod and the game are updated and i used to have this mod on another much older computer and it didnt happen
Disable the scenic menu and lower the battle size. You will still crash occasionally. Large mods are starting to do that as windows 10 updates.
Hello when i press play my game open and after like 5 seconds crash and error say:get objective texture failed for waterbump_0 what should i do?
Quote from: bluefire45 on May 05, 2019, 05:49:41 PM
Hello when i press play my game open and after like 5 seconds crash and error say:get objective texture failed for waterbump_0 what should i do?
Where did you download the mod? Have you tried reinstalling it? Did you edit any files? Were you able to play the mod previously?
Hello people. I am also having a problem with random crashes.
At first it was rather often, but i ticked loading on demand and it is now better. Now it's rare, but it still crashes after an hour or so. I'm running the latest version of the game and mod, my computer is more than powerful enough to run this game on the most demanding settings, however i still set it on medium and it doesn't help. My guess is that it's due to the old game engine that probably wasn't made to handle a lot of stuff, but i figured i should ask just in case there's a solution.
Sorry if someone already answered this question but i'm low on time and i can't go through three pages. Anyways i tried everything in the first post already, so if it was answered i'd suggest editing the first post to include the solution/explanation for people to see it right away.
Turning off the scenic menu and lowering the battle size helps but it will still crash, save often. Loading large towns like Lys after an hour of play or lots of fast traveling causes it for me. The real issue is some people crash often and others don't. The quality of the PC doesn't seem to matter. My old laptop playing in 720p never crashed while my new PC does. Let me know if that helped.
The Game Crashes randomly when i am about 20-30 in game the report says:
(Runtime Error! Program:D: \Steam \steamapps \common \MountBladeWarband \mb_warband.exe)
Quote from: just1N on May 16, 2019, 01:07:24 PM
The Game Crashes randomly when i am about 20-30 in game the report says:
(Runtime Error! Program:D: \Steam \steamapps \common \MountBladeWarband \mb_warband.exe)
Delete the steam version of this mod. I had a lot of problems with the steam version, and your problem was one of them. Download from modb instead. You will still run into some problems, but much less often.
I have the load textures on, made sure edit mode was off, made sure I'm on the latest version of warband but i am still having problems with crashing.
my game crash after every battle why
When I start the game it load to 1/4 and crashes.
I tried the steam version and the moddb version but it's the same problem at both.
I don't think that it is becuase of my PC (GeForce GTX 1070,Intel Core i7-8700 and Windows 10)
I really want to play this modification but nothing helps. I tried everythink that came in my mind but nothing helps.
I hope that somebody helps me here.
If you are like me, any response that does not help or you have already tried, will just make you mad as hell. So I sincerely apologize, if any of this fails you or you have already attempted.
This sounds like a incomplete or corrupted download or a problem with the primary Mount & Blade program. Can you run any other mods? I would attempt to re-install both which you have already probably done. For the Steam version I know a few weeks ago they were doing house cleaning on the Steam Side and sent out a series of 3 bad updates, so this may have afflicted you. I am sorry if none of this helps, but we want to get you up and running! If you have any more info or error messages please let us know, additionally join the discord server and someone may be able to walk you through potential fixes, most of the people in there are nice.
Quote from: Tages Grey on September 02, 2019, 02:37:27 PM
If you are like me, any response that does not help or you have already tried, will just make you mad as hell. So I sincerely apologize, if any of this fails you or you have already attempted.
This sounds like a incomplete or corrupted download or a problem with the primary Mount & Blade program. Can you run any other mods? I would attempt to re-install both which you have already probably done. For the Steam version I know a few weeks ago they were doing house cleaning on the Steam Side and sent out a series of 3 bad updates, so this may have afflicted you. I am sorry if none of this helps, but we want to get you up and running! If you have any more info or error messages please let us know, additionally join the discord server and someone may be able to walk you through potential fixes, most of the people in there are nice.
Strange. i never have Chrashes if i Play clean. If i start Cheating to the Edge and give myself 6000 Charismatic Points, then running around with thousands of soldiers and... ahw.. well you know what i mean. Or using this new Feature (bug) when you just Need to outnumber a garrison without Lord 2:1 for make then surrender instantly, then capturing all the stormlands, kill every stupid Lord that doesnt Support stannis..and.. and.. ahw.. well. edgy, edgy, edgy gameplay xD
i played this mod for at least 500 Hours and i assure you, that the Mod itself is allmost as stable as Viking Conquest, as Long as you dont corrupt your files by hitting the Mod to its Edge, using cheats or Bugs. so, if it is not a broken Game/Mod, it is a corrupted Savegame, at least thats what i can say from my experience.
I'm currently experiencing terrible performance in game from 20-30 fps in battles and 50 everywhere else. I have updated all my drivers and am using a radeon 5700xt and an AMD 3800x with 16gb of c16 3000mhz ram. Any ideas????
Quote from: Gheed on October 13, 2019, 09:29:13 PM
I'm currently experiencing terrible performance in game from 20-30 fps in battles and 50 everywhere else. I have updated all my drivers and am using a radeon 5700xt and an AMD 3800x with 16gb of c16 3000mhz ram. Any ideas????
Do you have your monitor plugged into your GPU and not your motherboard?
Try disabling Radeon settings like Chill.
Forgive me for not understanding the difference between screen tear and motion blur, but I'm not as savvy at the tech side as most of you. :)
I had no issues with this sort of thing on my old build from 2013, but my new PC must have a setting off somewhere. I continually have distortion of objects when turning, moving my camera, or any sort of motion. I am assuming it has to do with my screen resolution matching the game's capacity to handle the monitor's speed, so I tried playing with the FPS for a while. I ended up changing the Screen Resolution (3840x2160x32) from its default 144 Hz to 98 Hz and it's fixed for the moment. However, at 100+ Hz the problem resumes. I have Vertical Synchronization checked.
My system specs are as follows:
OS: Windows 11 Home
CPU: Intel i9-12900K
Memory: 64GB RAM
Display: Republic of Gamers UHD4K 144 Hz HDR Monitor
GPU: NVIDIA GeForce RTX 3060
I'd like to know if I'm able to run the game on a higher setting, or if this resolution is the optimal setting. I appreciate the help!